Focus 750

Modern design

Focus 750 Performance was created for sailors looking for a unique, modern but functional daily cruiser – recer for short handed crews. Clean connection of the hull with the deck, chined hull, low profile haches, folding cleats, deck line cover, improve the design of the boat and make it very funtional.

Trailable

The Focus 750 is easy to trail because of its weight and dimensions.  She is well adapted for the land transport. Being  2.50 m wide and with the weight just over 1.3 t., she can be trailed upright and even slip-launched. Thanks to a lifting  keel, removable rudder blade and a system to hoist the mast without the crane the boat can be transport even by the family car.

Lifting keel 

Lifting keel and retractable rudder also allow Focus 750 to reach parts of the sea that are usually reserved for much smaller boats. The boat is produced in 3 options: lifting heavy daggerboard (cat. C), lifting keel with bulb and fixed keel (cat. B)

Slip easly 

You don’t need a crane to launch  the Focus 750. The lifting keel and our mast lowering system makes you free and independent.  You can launch the boat directly from the trailer and set the mast easly.

The hull and deck is infused with a high quality vinylester resin using Vacuum assisted infusion lamination technology and multidirectional fiberglass to improve the strength, stiffness and reduce weight.

Chined hull

Chined hull  improves directional stability and increase internal volume and space under the deck. When the boat is heeled the yacht reaches an optimum underwater hull shape with a small wetted surface. The benefit is a yacht that is incredibly forgiving and will allow you to get away with being hit by a strong gust of wind, or becoming overpowered without having to reduce sail in a hurry. Optional twin rudder system provides better control especially when heeled and reduce the tendency to broach.

Hull

• polyester laminate reinforced with the roving fabric
• laminate with biaxial and uni-directional E-glass fabrics
• reinforced bottom and mast area
• white hull izo — npg gelcoat

Deck

• polyester laminate in sandwich technology , separator made of “Airex“, safety-walk areas
• laminate with biaxial and uni-directional E-glass fabrics
• white gelcoat deck finish

Deck equipment

• 1 bow pulpit, 2 pushpits, 2 half-pulpits, single rail posts
• alluminium rudder yoke with dagger rudder
• sliding hatch cover made of plexi, 2 dark windows,
• 1 hatch of the forward berth type FLUSH
• 2 jib tracks with the travellers RONSTAN
• Main sail track with traveller RONSTAN
• 2 stoppers  SPINLOCKx4
• 2 deck organizers SPINLOCKx4
• 3 cleats RONSTAN
• 2 winches LEWMAR/ANDERSEN
• deck blocks for sails regulation RONSTAN
• single guard rail with rail belts

Rigging and sails

• mast 9 m duraluminiu MAST
• boom duraluminium MAST in reggata versions with 3 roles for regulations
• boom vang RONSTAN
• tabernacles made of steel
• halyards: mainsail in horizontal cut  20 m², one reef level, six battens with regulation
• genoa in horizontal cut 11,5 m²
• dyneema soft lines

Ballast

• heavy INOX steel lifting keel 300 kg (profile NACA). Electic engine with keel lifting system
• inside ballast 200 kg

Interior

• double bow V- berth , 2 berth in main cabin
• place battery
• interior enclosure made of oak
• finishing of the sides and ceiling in topcoat
• mattresses

• 2 lockers in the main cabin,
• central mess table
• upholstery in Microfibra (synthetic velour)  hydrophobic, easy to clean
• electrical system: gel marine battery (65 Ah), switching station with 3 switches and battery tester, 4 ceiling light
• 2 shelves in main cabin
• deck jib furler
• jib UV cover
• adjustable stainless steel outboard engine bracket
• stern ladder
• bow platform

• Membrane sails with Black Aramid
• Ronstan RF7 table for mainsail
• Tiller extension RONSTAN
• Gennaker 40 m² with equipment
• Gennaker sliding bowsprit
• Ronstan ORBIT blocks